EN 
ES
PT
SV
DE
TR
FR
Blog
-
BlogAug 01,2022
What are the biggest sources of recycling for common plastics such as PE, PP and PET? Do you know
In the field of renewable resources, there is a public announcement that recycling 1 tonne of waste plastic = saving 6 tonnes of oil, not including the large amount of water resources saved in the process of refining new materials, etc. This shows that plastic recycling plays a huge economic value. The main materials used… Continue reading What are the biggest sources of recycling for common plastics such as PE, PP and PET? Do you know
Read more -
BlogJul 29,2022
How should I colour match black, white, red, yellow and special coloured materials?
White How to prepare extra white plastic To match a bright white products, the primary choice of the bottom tone with blue titanium dioxide (should be chosen to use the chlorination process to produce titanium dioxide, its small particle size, uniform molecular weight distribution), because the bottom tone with blue titanium dioxide with white, will… Continue reading How should I colour match black, white, red, yellow and special coloured materials?
Read more -
BlogJul 29,2022
An article to show you how TPE film is made
In segmented TPE materials, permeation occurs mainly in the rubbery state, in the soft segment phase of elasticity rather than through the hard segment phase. The permeation properties therefore correspond to the variation of the hard segment content. In general, the soft segment content mainly determines the water vapour permeability. Soft Section The basic polyether… Continue reading An article to show you how TPE film is made
Read more -
BlogJul 21,2022
New Carbon Nanotube Structures with Hybrid Materials that Modify their Remarkable Properties
Carbon-based nanomaterials such as carbon nanotubes (CNTs), fullerenes and graphene are of interest due to their unique physical properties. A new study explores the potential of hybrid nanostructures and introduces a new porous graphene CNT hybrid structure with significant thermal and mechanical properties. This study shows how the significant properties of new graphene CNT heterostructures… Continue reading New Carbon Nanotube Structures with Hybrid Materials that Modify their Remarkable Properties
Read more -
BlogJul 21,2022
Do you know the methods for testing the toughness of modified recycled plastics?
Modified plastics, refers to the general purpose plastics and engineering plastics based on the filling, blending, strengthening and other methods of processing modified plastic products to improve the performance of flame retardancy, strength, impact resistance, toughness and other aspects. Today, modified plastics are playing an increasingly important role in national life, especially in the automotive… Continue reading Do you know the methods for testing the toughness of modified recycled plastics?
Read more -
BlogJul 21,2022
In addition to the screw and barrel, these components are equally important when choosing an extruder!
How do people usually buy extruders? Not only do you need to analyze your own needs, but you also need to have a good understanding of the supplier and the extruder. Most of the enterprises in the purchase of new extruder has been basically clear, need to buy twin-screw or single-screw, need to produce what… Continue reading In addition to the screw and barrel, these components are equally important when choosing an extruder!
Read more -
BlogJul 18,2022
Polypropylene shrinkage difficult to control; What are the influencing factors?
Polypropylene is one of the most widely used general purpose plastics, with the advantages of low density, good rigidity, resistance to flexing, chemical resistance and good insulation. Its shortcomings are poor low-temperature impact performance, easy ageing and large moulding shrinkage. Modification can improve the low temperature impact properties, moulding shrinkage and thermal ageing properties of… Continue reading Polypropylene shrinkage difficult to control; What are the influencing factors?
Read more -
BlogJul 18,2022
Factors Affecting the Glass Transition Temperature, Melt Temperature and Viscous Flow Temperature of Polymers
The glass transition temperature (Tg), melt temperature (Tm) (for crystalline polymers) and viscous flow temperature (Tf) (for non-crystalline polymers) of polymers are important temperature parameters. Tg determines the service temperature of the polymer, while Tm and Tf determine the processing temperature of the polymer. There are many factors that influence the Tg, Tm and Tf… Continue reading Factors Affecting the Glass Transition Temperature, Melt Temperature and Viscous Flow Temperature of Polymers
Read more -
BlogJul 18,2022
EVA/POE Whole Industry Chain Analysis
In recent years, with the rapid development of the photovoltaic industry, photovoltaic film particles (EVA/POE) demand for raw materials is rapidly increasing. According to statistics, the global film production capacity is almost entirely concentrated in China, and EVA and POE as the core packaging materials, China is still highly dependent on imports, 2021, China’s EVA… Continue reading EVA/POE Whole Industry Chain Analysis
Read more -
BlogJul 08,2022
Why is the melt index of polypropylene different? Read on to know how to find the PP you want in a polymer plant.
The Melt Index is a value that represents the flow of a plastic material during processing and is based on the DuPont method of identifying the properties of plastics, otherwise known as the melt flow rate. Polypropylene is a thermoplastic resin obtained through the polymerization of propylene and is divided into three main categories: isotactic… Continue reading Why is the melt index of polypropylene different? Read on to know how to find the PP you want in a polymer plant.
Read more
